Nitro Combustion Motor / RC Tuning Motors

2-stroke engine

The most effective tuning measure is of course to substitute the original combustion model with a tuning engine. With an up to 4.5 ph they are speed pros (35,000 rpm) the real engine in the RC combustion tuning scene. The 3-neeedle slide carburettor ensures the correct mix ratio for every situation.

4 stroke engine

For the model aeroplane the radial motor is the jewel in the crown. This engine impresses with strength, optics, dynamics and sound and this makes the 4-stroke model combustion engine a true experience.

Regulator

Replace the mechanical regulator with an electronic one.

Polished manifold

A polished manifold is better than a varnished one because it can disperse the exhaust gases faster and more efficiently. This boosts the performance of the model nitro combustion.

Spark plug

A turbo gold spark plug, which is also coated, achieves improvements at high revs compared to a standard spark plug.

Fuel

One of the best fuel types is the Tornado fuel, which protects the RC model engine with special rust protection additives. The normal fuel mixture is 16 percent nitro, but 25 percent nitro content can give thermal advantages and the combustion engine performance increases, although the compression must be reduced.

Top performance

Increase the length of the exhaust pipe from 95 mm to 100 mm, measured from the outer arc of the bend to the thickest part of the pipe. With this change the Nitro combustion engine will run optimally.